19-2. INITIAL MACHINE GUN RING KIT INSTALLATION/REMOVAL (CONT)
(10) Position top platform (8) in cab floor (9) with two washers
(15) and screws (16) in clinch nuts (14).
damage your eyes. Wear safety goggles
when using; avoid contact with eyes. If
sealant contacts eyes, flush eyes with
attention. Failure to comply may result in
injury to personnel.
Install center seat in folded and raised
position with seat rails in forward position.
(11) Apply sealing compound to threads of two screws (19).
(12) Position center seat (17) on top platform (8).
Flat sides of screw will be in line with seat
(13) Position two washers (18) and screws (19) in seat mount
(14) Slide center seat (17) fully forward.
(15) Fold center seat (17) down.