Plate, Steel, ASTM A-36
14.49 in. (368 mm) x 5.50 in. (140.1 mm)
x 0.38 in. (9.6 mm) thick
Figure D-46. Transmission Lift and Mounting Bracket Top Plate
a. All dimensions are in inches (millimeters).
b. Fabricate top plate (3) from ASTM A-36 steel plate.
c. Drill 1-3/4 in. (44.4 mm) diameter hole through 2 places as shown in Figure D-46.
Tansmission Lift and
Mounting Bracket Top Plate.
d. Round two corners to 0.750 in (19 mm) radius as shown in Figure D-46. Tansmission Lift and Mounting
Bracket Top Plate.
e. De-burr and remove sharp edges.