D-26. TRANSMISSION LIFT AND MOUNTING BRACKET ASSEMBLY (CONT)
Plate, Steel, ASTM A-36
18.75 in. (476.2 mm) x 20.50 in. (520.7 mm) x
0.38 in. (9.6 mm) thick
Figure D-45. Tansmission Lift and Mounting Bracket Side Plates
a. All dimensions are in inches (millimeters).
b. Fabricate two side plates (2) from ASTM A-36 steel plate.
c. Cut slot 0.385 in. (9.8 mm) wide X 2.00 in. (50.8 mm) long in each side plate (2) as shown in Figure D-45.
Tansmission Lift and Mounting Bracket Side Plates.
d. De-burr and remove sharp edges.