TM 9-2320-366-34-3
a. Removal.
NOTE
Tag connectors and connection points prior
to disconnecting.
(1) Loosen two screws (1) on connectors L8 and L9 (2).
(2) Disconnect connectors L8 and L9 (2) from solenoid (3).
(3) Remove two gaskets (4) from connectors L8 and L9 (2).
Discard gaskets.
CAUTION
Cap or plug hydraulic hoses and connection
points to prevent contamination of hydraulic
system. Failure to comply may result in damage
to equipment.
NOTE
Tag hydraulic hoses and connection points prior
to disconnecting.
(4) Disconnect four hoses (5) from four-way relief valve (6).
Change 1
17-13