Cap or plug hydraulic hoses and fittings to
prevent contamination of hydraulic system.
Failure to comply may result in damage to
Tag hydraulic hoses and connection points
prior to disconnecting.
(2) Disconnect oil hose (4) from PTO (3).
(3) Remove oil hose (4) from 90-degree fitting (5).
Perform steps (4) through (5.6) on vehicles
equipped with transmission oil cooler tubes.
(4) Disconnect transmission oil cooler return tube (6) from
90-degree fitting (7).
Vehicles equipped with either non-corrosive
enhanced fittings with one preformed packing or
corrosive enhanced fittings with two preformed
When removing a non-corrosive
replace it with corrosive
Perform step (5) on vehicles equipped with
corrosive enhanced fittings.
(5) Remove preformed packing (8) from 90-degree fitting (7).
Discard preformed packing.