TM 9-2320-366-34-3
(13) Position catwalk (17) on vehicle with four isolators (18),
screws (19), washers (20), and self-locking nuts (21).
(14) Tighten four self-locking nuts (21) to 27-33 lb-ft (37-48
N·m).
e. Adjustment.
(1) Open left and right 30K winch catwalks (TM 9-2320-366-
10-2).
NOTE
Left and right side pilot pressure are adjusted
the same way. Pressure readings are read
at the 30K winch relief valve. Adjustment of
pressure is made at the cartridge valve on
the 30K winch hydraulic motor. Left side
shown.
(2) Disconnect hose (1) from tee fitting (2).
(3) Install adapter (3) on tee fitting (2).
(4) Connect hose (1) to adapter (3).
(5) Install pressure transducer (4) in adapter (3).
(6) Connect test cable (5) to pressure transducer (4).
16-531