TM 9-2320-366-34-3
(2) Remove screw (3), lockwasher (4), and pin locking plate
(5) from under lift assembly (6). Discard lockwasher.
NOTE
Step (3) requires the aid of an assistant.
(3) Remove pivot pin (7) and bushing (8) from telescopic lift
cylinder (9).
WARNING
Use care when removing retaining rings.
Retaining rings are under tension and can
act as projectiles when released. Failure
to comply may result in injury to
personnel.
(4) Remove retaining ring (10) from cylinder end cap (11).
NOTE
Step (5) requires the aid of an assistant.
(5) Remove telescopic lift cylinder (9) from underlift
assembly (6).
(6) Remove 90-degree fitting (2) from telescopic lift cylinder
(9).
(7) Remove preformed packing (10) from 90-degree fitting
(2). Discard preformed packing.
Change 1
16-435