TM 9-2320-366-34-3
(8) Inspect bearing (7) for free movement and pitting, or
corrosion.
(9) Measure 12 compression springs (8) for minimum length
of 1.00 in. (2.5 cm).
(10) Inspect two hoses (9) for cracks, breaks, or damaged
threads.
(11) Inspect two roller bearings (10) for free movement and
pitting or corrosion.
(12) Measure two thrust washers (11) for minimum thickness
of 0.37 in. (0.95 cm)
(13) Inspect ring gear (12) for pitted or broken gear teeth.
(14) Inspect gear end support (13) seating surface for nicks
or scratches.
(15) Inspect output shaft (14) for pitted, or broken splines.
(16) Measure two nylon thrust washers (15) for minimum
thickness of 0.17 in. (0.4 cm).
(17) Inspect primary carrier assembly (16) for free movement
of gears, pitting, or broken teeth.
(18) Inspect secondary carrier assembly (17) for free
movement of gears, pitting, or broken teeth.
(19) Inspect sun gear (18) for pitted or broken teeth.
16-361