(61) Install relief valve (87) in valve manifold (8).
(62) Install five preformed packings (88) and two preformed
packings (89) on valve manifold (8).
Adhesive Sealant MIL-S-46163 can damage
Wear safety goggles/glasses
when using; avoid contact with eyes.
sealant contacts eyes, flush eyes with water
and get immediate medical attention. Failure
to comply may result in injury to personnel.
(63) Apply sealing compound to threads of four screws (90).
(64) Install top directional valve body (73) on valve body (8)
with four screws (90).
(65) Apply sealing compound to threads of lever (91).
(66) Install lever (91) in pinion seal (82).
(67) Perform steps (61) through (66) on remaining three top
directional valve bodies.
All solenoids are assembled the same way.
One solenoid shown.
(68) Install solenoid cylinder (92) and solenoid sleeve (93) on