16-44. M1089 CABLE FOLLOWER REPLACEMENT/REPAIR (CONT)
(7) Install two springs (20) on posts (6).
Adhesive Sealant MIL-S-46163 can damage
Wear safety goggles/glasses
when using; avoid contact with eyes.
sealant contacts eyes, flush eyes with water
and get immediate medical attention. Failure
to comply may result in injury to personnel.
(1) Apply sealing compound to threads of two screws (1).
(2) Install cable follower assembly (2) on hoist assembly (3)
with four washers (4) and two screws (1).
Use care when installing springs. Springs
are under tension and can act as
projectiles when released.
comply may result in injury to personnel.
(3) Attach springs (5) to hoist assembly (3).
e. Follow-On Maintenance.
(1) Install hoist assembly (para 16-43).
(2) Operate MHC and check for proper operation (TM 9-
End of Task.