16-43. M1089 HOIST ASSEMBLY REPLACEMENT (CONT)
(6) Disconnect two hydraulic hoses (8) from fittings (9).
(7) Remove two preformed packings (10) from fittings (9).
Discard preformed packings.
(8) Remove jamnut (11) from backside of tension load cell
(9) Remove screw (13) and stop block (14) from boom
Do not remove swivel nut on back side of
tension load cell. Failure to comply may
result in injury to personnel and damage
(10) Loosen swivel nut (16) until flush with end on backside
of tension load cell (12).