(7) Position tension link cylinder (2) in boom assembly (7)
with pivot shaft (8).
(8) Install two rivet eyebolts (9) in pivot shaft (8).
Adhesive Sealant MIL-S-46163 can damage
your eyes. Wear safety goggles when using;
avoid contact with eyes. If sealant contacts
eyes, flush eyes with water and get
immediate medical attention.
comply may result in injury to personnel.
(9) Apply sealing compound to threads of two screws (10).
(10) Position two bushings (11) and washers (12) in rivet
eyebolts (9) with screws (10).
(11) Tighten screws (10) to 240-260 lb-ft (325-352 N·m).
(12) Perform Steps (1) through (11) on left side tension link
c. Follow-On Maintenance.
Perform crane load test (para 16-62).
End of Task.