16-27. M1084/M1086 THREE WAY CONTROL VALVE ASSEMBLY
(29) Apply sealing compound to threads of three inlet body
(30) Position six preformed packings (38) and two valve
bodies (14) on inlet body (6) with three nuts (39).
(31) Tighten three nuts (39) to 132 lb-in. (15 N·m).
Adhesive sealant MIL-S-46163 can damage
Wear safety goggles/glasses
when using; avoid contact with eyes.
sealant contacts eyes, flush eyes with water
and get immediate medical attention. Failure
to comply may result in injury to personnel.
(32) Apply sealing compound to threads of three screws (40).
(33) Position three preformed packings (41) and valve body
(14) on inlet body (6) with three screws (40).
(34) Tighten three screws (40) to 132 lb-in. (15 N m).