TM 9-2320-366-34-3
NOTE
Step (4) requires the aid of an assistant.
(4) Remove four screws (6), lockwashers (7), and cross
relief valve (1) from hydraulic motor (8).
Discard
lockwashers.
(5) Remove two preformed packings (9) from hydraulic
motor (8). Discard preformed packings.
(6) Remove two 90-degree fittings (3) from cross relief valve
(1).
(7) Remove two preformed packings (10) and performed
packings (11) from 90-degree fittings (3).
Discard
preformed packings.
(8) Remove fitting (5) from cross relief valve (1).
(9) Remove preformed packings (12 and 13) from fitting (5).
Discard preformed packing.
b. Installation.
(1) Install preformed packings (1 and 2) on fitting (3).
(2) Install fitting (3) in cross relief valve (4).
(3) Install two preformed packings (5) and preformed
packings (6) on 90-degree fittings (7).
(4) Install two 90-degree fittings (7) in cross relief valve (4).
16-125