16-23. M1084/M1086 SWING DRIVE ASSEMBLY REPLACEMENT/REPAIR (CONT)
(34) Remove two races (51) from hub (48).
Dry Cleaning Solvent (P-D-680) is TOXIC and flammable. Wear protective goggles and
gloves; use only in well ventilated area; avoid contact with skin, eyes, and clothes, and do
not breathe vapors. Keep away from heat or flame. Never smoke when using solvent; the
flashpoint for Type I Dry Cleaning Solvent is 100°F (38°C) and for Type II is 130°F (50°C).
Failure to do so may result in serious injury or death to personnel.
If personnel become dizzy while using dry cleaning solvent, immediately get fresh air and
medical help. If solvent contacts skin or clothes, flush with cold water. If solvent contacts
eyes, immediately flush eyes with water and get immediate medical attention. Failure to
comply may result in injury to personnel.
(1) Clean all metal parts with dry cleaning solvent.