16-12. M1084/M1086 TURNTABLE BEARING REPLACEMENT
This task covers:
c. Follow-On Maintenance
Turntable removed (para 16-11).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B)
Tools and Special Tools (Cont)
Chain, Welded (TM 9-2320-366-10)
Wrench Set, Socket (Item 84, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Turntable bearing weighs approximately
150 lbs (68 kgs). Attach a suitable lifting
device prior to removal. Failure to comply
may result in injury to personnel or
damage to equipment.
(1) Remove 16 screws (1) and washers (2) from turntable
(2) Install chain on turntable bearing (3) with two washers
(2) and screws (1).
Step (3) requires the aid of an assistant.
(3) Guide hoses (4) and electrical connector (5) through
turntable bearing (3).
(4) Remove turntable bearing (3) from subframe (6).