Cap or plug hydraulic hoses and fittings to
prevent contamination of hydraulic system.
Failure to comply may result in damage to
Tag hydraulic hoses and connection points
prior to disconnecting.
(2) Disconnect hydraulic hoses (5 and 6) from telescopic
(3) Remove four screws (8) and washers (9) from boom
base section (4).
Step (4) requires the aid of an assistant.
(4) Lift boom mid section (10) enough to allow removal of
two body wear pads (11).
(5) Remove two body wear pads (11) from outer end of
boom base section (4).