(8) Tighten two self-locking nuts (19) to 199-243 lb-ft (270-
(9) Tighten nut (22) to 40-48 lb-ft (54-66 N·m).
(10) Perform steps (7) through (9) on right side cab mounting
Standard cab weighs approximately 1400
lbs (636 kgs). M1093/M1094 cab weighs
approximately 1700 lbs (772 kgs). Attach
installation. Failure to comply may result
in serious injury or death to personnel or
damage to equipment.
Use spreader bar and place sheet rubber on
cargo sling to prevent damage to cab roof.
Failure to comply may result in damage to
Steps (11) through (23) require the aid of two
(11) Lower cab door windows and install cargo sling through
rear section of cab doors (23).
(12) Remove cab (24) from cab maintenance stand.