13-22. M1088 FRAME PLATE REPLACEMENT (CONT)
b. LH Installation.
Frame plate weighs approximately 90 lbs (41
kgs). Attach a suitable lifting device prior to
installation. Failure to comply may result in
damage to equipment or injury to personnel.
Steps (1) through (9) require the aid of an
(1) Position frame plate (1) on vehicle with ten bolts (2) and
self-locking nuts (3).
(2) Tighten ten self-locking nuts (3) to 77-92 lb-ft (105-125
(2.1) Cut two plastic edges (3.1) to approximately 9 in. (23
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area.
adhesive, solvent, or sealing compound
immediately with soap and water. Failure
to comply may result in injury to
(2.2) Apply adhesive to plastic edge (3.1).
(2.3) Install plastic edge (3.1) on support bracket (4).