Both support brackets are removed the same
way. One support bracket shown.
(5) Remove two self-locking nuts (17), support bracket (18),
and two bolts (19) from vehicle. Discard self-locking
(5.1) Remove plastic edge (19.1) from support bracket (18).
Discard plastic edge.
(6) Perform steps (5) and (5.1) on remaining support
Frame plate weighs approximately 90 lbs
(41 kgs). Attach a suitable lifting device
prior to removal. Failure to comply may
result in damage to equipment or injury to
When removing bolts, continuous removal of
collars is mandatory. Failure to comply will
result in seizing of collar to bolt.
(7) Remove ten collars (20), bolts (21), and frame plate (4)
from vehicle. Discard collars and bolts.