TM 9-2320-366-34-2
13-13. M1094 SUSPENSION BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Dump body raised (TM 9-2320-366-10-1).
Engine shut down (TM 9-2320-366-10-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B)
Tools and Special Tools (Cont)
Wrench Set, Socket (Item 84, Appendix B)
Materials/Parts
Nut, Self-locking (8) (Item 211, Appendix F)
Personnel Required
(2)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Removal.
NOTE
Left and right side suspension brackets are
removed the same way. Left side shown.
Step (1) requires the aid of an assistant.
(1) Remove eight self-locking nuts (1), bolts (2), and
suspension bracket (3) from frame rail (4). Discard
self-locking nuts.
13-82