TM 9-2320-366-34-2
NOTE
Steps (8) through (13) require the aid of an
assistant.
(8) Position extraction tube (1) on vehicle with six washers
(14), bolts (15), backing plate (16), lockwashers (17),
and nuts (18).
(9) Position bolt (19) and self-locking nut (20) in extraction
tube (1).
(10) Position two bolts (21) and self-locking nuts (22) in
extraction tube (1).
(11) Tighten six nuts (18), self-locking nut (20), and two self-
locking nuts (22) to 210-225 lb-ft (285-305 N·m).
(12) Position extension bracket (23) on extraction tube (1)
with two bolts (24) and self-locking nuts (25).
(13) Tighten two self-locking nuts (25) to 210-225 lb-ft (285-
305 N·m).
c. Follow-On Maintenance.
(1) Install rear fender (TM 9-2320-366-20-4).
(2) Lower dump body (TM 9-2320-366-10-1).
End of Task.
13-81