TM 9-2320-366-34-2
k. M1094 Removal.
NOTE
Left and right side of rear tension beam is
removed the same way. Left side shown.
Steps (1) through (4) require the aid of an
assistant.
(1) Remove pin (1) and shackle (2) from rear tension beam
(3).
CAUTION
When removing bolts, continuous removal of
collars is mandatory. Failure to comply will
result in seizing of collar to bolt.
(2) Remove two collars (4) and bolts (5) from rear tension
beam (3). Discard collars and bolts.
(3) Remove two self-locking nuts (6), bolts (7), and rear
spreader bar bracket (8) from rear tension beam (3).
Discard self-locking nuts.
(4) Remove three collars (9), bolts (10), and taillight
mounting bracket (11) from rear tension beam (3).
Discard collars and bolts.
(5) Perform steps (1) through (4) on right side of rear
tension beam.
(6) Remove rear tension beam (3) from vehicle.
13-29