TM 9-2320-366-34-2
(6) Install pin (4) on rear differential carrier (5).
(7) Position V-rod control arm mounting plate (6) on rear
differential carrier (5) with four bolts (7).
(8) Tighten four bolts (7) to 398-486 lb-ft (540-659 N m).
(9) Position bolt (8) and washer (9) in clevis assembly (10).
(10) Tighten bolt (8) to 60-90 lb-ft (81-122 N·m).
NOTE
Left and right side springs are installed the
same way. Right side shown.
(11) Position four bolts (11) in spring (12).
(12) Tighten four bolts (11) to 43-51 lb-ft (58-69 N·m).
(12.1) Perform steps (11) and (12) on left side spring.
Change 1
10-47