TM 9-2320-366-34-2
NOTE
Left and right side spring mounts and
brackets are removed the same way. Right
side shown.
(56) Remove spring mount (64) from rear axle assembly (14).
(57) Remove pin (65) from rear axle assembly (14).
(58) Remove two self-locking nuts (65.1), bolts (65.2), and
bracket (65.3) from rear axle assembly (14). Discard
self-locking nuts.
(59) Perform steps (56) through (58) on left side spring mount
and bracket.
NOTE
Perform steps (60) and (61) on replacement
rear axle assembly.
(60) Remove 10 protective covers (66) from rear axle
assembly (14).
(61) Remove nuts (67 and 68) and bracket (69) from rear
axle assembly (14).
NOTE
Perform steps (62) and (63) on old rear axle
assembly.
(62) Install bracket (69) on rear axle assembly (14) with nuts
(67 and 68).
(63) Install 10 protective covers (66) on rear axle assembly
(14).
Change 1
10-45