TM 9-2320-366-34-2
b. Installation.
NOTE
Left and right side rear axle bogie shafts are
installed the same way. Right side shown.
(1) Apply light coat of grease to rear axle bogie shaft (1).
NOTE
Steps (2) through (5) require the aid of an
assistant.
(2) Position rear axle bogie shaft (1) on frame rail (2) with
four bolts (3) and self-locking nuts (4).
(3) Tighten four self-locking nuts (4) to 210-225 lb-ft (285-
305 N·m).
(4) Position four bolts (5) and self-locking nuts (6) in rear
axle bogie shaft (1).
(5) Tighten four self-locking nuts (6) to 210-225 lb-ft (285-
305 N·m).
c. Follow-On Maintenance.
Install rear axle bogie (para 10-3).
End of Task.
10-29