TM 9-2320-366-34-2
10-3. REAR AXLE BOGIE REPAIR (CONT)
(2) Install seals (3 and 4) on spacer (5).
(3) Install spacer (5) on shaft (2).
(4) Install bearing (6) on shaft (2).
(5) Install tube (7) and spacer ring (8) on shaft (2).
(6) Press two bearing races (9) in housing (10).
CAUTION
Use care when installing housing. Seals are
easily damaged.
Failure to comply may
result in damage to equipment.
(7) Install housing (10) on shaft (2).
(8) Position bearing cone (11) in housing (10).
(8) Position mounting plate (12) on shaft (2) with three
screws (13).
10-24
Change 1