TM 9-2320-366-34-2
b. Installation.
NOTE
Left and right side spring mounts are installed
the same way. Left side shown.
(1) Install pin (1) in intermediate axle assembly (2).
(2) Position spring mount (3) on pin (1) and intermediate
axle assembly (2).
(2.1) Perform steps (1) and (2) on right side spring mount.
WARNING
Intermediate
axle
assembly
weighs
approximately 1580 lbs (717 kgs) and
must be supported during installation.
Failure to comply may result in serious
injury or death to personnel or damage to
equipment.
(3) Positionintermediateaxleassembly(2)on
transmission/differential lift with chain.
NOTE
Step (4) requires the aid of two assistants.
(4) Position intermediate axle assembly (2) under vehicle.
Change 1
10-11