TM 9-2320-366-34-2
7-18. TRANSMISSION ASSEMBLY REPLACEMENT (UNUSUAL CONDITIONS) (CONT)
NOTE
Perform steps (64) through (69) on vehicles
equipped with transmission oil cooler
hoses.
(64) Install two preformed packings (64 and 69) on 90-
degree fittings (65 and 66).
(65) Position 90-degree fittings (65 and 66) on transmission
(2).
(66) Tighten jam nuts (67) on fittings (65 and 66).
(67) Position transmission oil cooler hose (62) on 90-
degree fitting (65).
(68) Position transmission oil cooler hose (68) on 90-
degree fitting (66).
(69) Tighten transmission oil cooler hoses (62 and 68) to
94-104 lb-ft (127-141 N·m).
NOTE
Perform steps (70) and (71) on vehicles
equipped with transmission oil cooler hoses.
Steps (70) and (71) require the aid of an
assistant.
(70) Position lower helilift support crossmember (70) on
vehicle with four bolts (71) and self-locking nuts (72).
(71) Tighten four self-locking nuts (72) to 295-369 lb-ft
(400-500 N·m).
7-132
Change 1