TM 9-2320-366-34-2
7-14. CONTROL VALVE MODULE STRAINER REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Control valve module removed (para 7-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Wrench, Torque, 0-150 lb-in. (Item 91, Appendix B)
Tools and Special Tools (Cont)
Wrench Set, Socket (Item 85, Appendix B)
Materials/Parts
Seal (Item 375, Appendix F)
Gasket (Item 63, Appendix F)
Strainer, Suction (Item 428, Appendix F)
a. Removal.
NOTE
Perform step (1) on serial numbers prior to
6510032369.
(1) Remove four bolts (1) from housing (2).
NOTE
Perform step (2) on serial number
6510032369 and higher.
(2) Remove three bolts (1) from housing (2).
(3) Remove housing (2) from channel plate (3).
(4) Remove strainer (4) from channel plate (3). Discard
strainer.
(5) Remove gasket (5) from channel plate (3). Discard
gasket.
(6) Remove seal (6) from housing (2). Discard seal.
7-94