TM 9-2320-366-34-2
NOTE
Perform steps (54) through (56) on
transmission serial numbers prior to
6510032369.
Steps (54) and (55) require the aid of two
assistants.
(54) Raise transmission (1) in position between LH and RH
engine and transmission mount brackets (54 and 55).
(55) Position four bolts (56) in LH and RH engine and
transmission mount brackets (54 and 55).
(56) Tighten eight bolts (56) to 330-378 lb-ft (448-513 N·m).
(57) Position 12 washers (58) and bolts (59) in torque
converter housing module (60).
(58) Tighten 12 bolts (59) to 37-45 lb-ft (50-61 N·m).
(59) Install 90-degree fittings (61 and 62) in secondary air
tank (63).
(60) Connect air hose (64) to 90-degree fitting (61).
(61) Connect air hose (65) to 90-degree fitting (62).
Change 1
7-35