TM 9-2320-366-34-2
6-6. STARTING MOTOR REPAIR (P/N M0017703ME) (CONT)
(20) Remove preformed packing (30) from nose housing (26).
Discard preformed packing.
(21) Remove plug (31) and oil wick (32) from nose housing
(26). Discard oil wick.
CAUTION
Oil wick should soak in lubricating oil for a
minimum of four hours.
(22) Place replacement oil wick (32) in container of oil.
(23) Remove bushing (33) from nose housing (26). Discard
bushing.
(24) Remove screw (34), and washer (35) from shift housing
(18).
(25) Remove pin (36) from shift housing (18).
(26) Remove preformed packing (37) from pin (36). Discard
preformed packing.
(27) Remove drive (38), lever (39), and washer (40) from shift
housing (18). Discard washer.
(28) Remove oil seal (41) and bushing (42) from shift housing
(18). Discard oil seal and bushing.
6-36
Change 1