TM 9-2320-366-34-2
NOTE
Replace starting motor if drive housing fails
visual inspection or resistance checks.
(15) Inspect starting drive housing (19) for cracks, pitting, or
corrosion.
NOTE
Replace drive housing if continuity is not
present between field coil terminals and drive
housing.
(16) Measure resistance between field coil terminals (20 and
21).
(17) Measure resistance between field coil terminals (20 and
21) and ground terminal (22).
c. Assembly.
(1) Position washer (1), fiber washer (2), and washer (3) on
armature (4).
(2) Install bushing (5) in brush housing (6).
(3) Install preformed packing (7) on brush housing (6).
(4) Install oil wick (8) and plug (9) in brush housing (6).
6-21