4-7. FUEL CONTROL LINKAGE REPLACEMENT
This task covers:
c. Follow-On Maintenance
Engine shut down (TM 9-2320-366-10-1).
Rocker arm assemblies removed (para 3-12).
Tools and Special Tools
Tool Kit, Intl. Comb. Eng. (TM 9-2320-366-20)
Wrench, Torque, 0-150 lb-in. (Item 91,
Tools and Special Tools (Cont)
Adapter, Socket Wrench, (Item 3, Appendix B)
Socket Wrench Attachment, Screwdriver (TM 9-2320-
Hammer, Hand Soft Head (Item 33, Appendix B)
Tool Kit, Genl Mech (Item 78, Appendix B)
Wrench Set, Socket (Item 85, Appendix B)
Lubricating Oil, Engine (Item 47, Appendix C)
(1) Remove clip (1) from adapter sleeve (2).
Do not use hard-jawed pliers or screwdriver
to move sleeve. Failure to comply may result
in damage to equipment.
(2) Slide adapter sleeve (2) in cylinder head (3).
Use care when removing retaining rings.
Retaining rings are under tension and can
act as projectiles when released. Failure
to comply may result in injury to
(3) Remove retaining ring (4) and clevis pin (5) from
governor linkage (6).