3-22. INLET MANIFOLD REPLACEMENT (CONT)
(13) Install two preformed packings (18) on adapters (19).
(14) Install two adapters (19) in inlet manifold (3).
damage your eyes. Wear safety goggles
when using; avoid contact with eyes. If
sealant contacts eyes, flush eyes with
attention. Failure to comply may result in
injury to personnel.
(15) Apply sealing compound to threads of two ether nozzles
(16) Install two ether nozzles (20) in adapters (19).
(17) Connect two ether start tubes (21) to ether start nozzles
c. Follow-On Maintenance.
(1) Install fuel ratio control tube (TM 9-2320-366-20-3).
(2) Install inlet manifold cover (para 3-21).
(3) Install air inlet elbow (para 3-20).
(4) Install valve cover (TM 9-2320-366-20-3).
End of Task.