3-11. FLYWHEEL HOUSING REPLACEMENT
This task covers:
c. Follow-On Maintenance
Starting motor removed (TM 9-2320-366-20-3).
Engine speed sensor removed (TM 9-2320-366-20-3).
Engine removed (para 3-3).
Flexplate removed (para 3-10).
Crankshaft rear seal removed (para 3-9).
Oil pan removed (para 3-16).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 92,
Gasket Maker (Item 34.1, Appendix C)
Screw, Self-Locking (10) (Item 368.1,
Replacement flywheel housing will have a
plug on the right hand side.
Flywheel housing weighs approximately 75
lbs (34 kgs). Attach a suitable lifting device
prior to removal.
Failure to comply may
result in injury to personnel or damage to
(1) Remove bolt (1) from flywheel housing (2).
(2) Remove two bolts (3) from flywheel housing (2).
Step (3) requires the aid of an assistant.
(3) Remove 10 self-locking screws (4) and flywheel housing
(2) from engine (5). Discard self-locking screws.