3-5. ENGINE BRACKET REPLACEMENT
This task covers:
c. Follow-On Maintenance
Air compressor removed (para 11-2) (left
100 amp alternator removed, if equipped (TM
9-2320-366-20-3) (right mount support).
200 amp alternator removed, if equipped (TM
9-2320-366-20-5) (right mount support).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Nut, Self-locking (Item 210, Appendix F)
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
Perform step (1) on right engine bracket.
(1) Remove two screws (1) and washers (2) from alternator
support bracket (3).
Engine weighs approximately 1500 lbs (681
kgs). Attach a suitable lifting device prior to
removal. Failure to comply may result in
serious injury or death to personnel or
damage to equipment.
Do not lift engine at this time. Failure to
comply may result in damage to equipment.
(2) Take up slack with lifting device.