TM 9-2320-366-34-1 2-664          Change 1 WARNING       CAUTION       Read WARNING and CAUTION on following page.            TEST OPTIONS            Continuity Test or STE/ICE-R Test #91     REASON FOR QUESTION                 KNOWN INFO              Replace transmission external wiring harness (para 6-7). YES 1. NO START Faulty transmission external wiring harness. Faulty transmission internal wiring harness. Faulty A solenoid. Faulty WTEC III transmission ECU.        POSSIBLE PROBLEMS        Circuit breaker OK. Batteries OK. WTEC III cab transmission harness OK. Is continuity present from connector P119-M to connector P67-G? If continuity is not present, transmission external wiring harness is faulty. c55. WTEC III TRANSMISSION PUSHBUTTON SHIFT SELECTOR (TPSS) DISPLAYS MAIN CODE         42, 44, 45, 46, AND/OR 69 SUB CODE 12 (SERIAL NUMBER 6510032369 AND HIGHER) INITIAL SETUP   Equipment Condition     Engine shut down (TM 9-2320-366-10-1).     Batteries disconnected (TM 9-2320-366-20-3).   Tools and Special Tools     Tool Kit, Genl Mech (Item 78, Appendix B)     STE/ICE-R (Item 70, Appendix B)     Multimeter, Digital (Item 41, Appendix B)     Goggles, Industrial (Item 28, Appendix B)     Wrench, Torque, 0-200 lb-in. (Item 93, Appendix B)     Wrench Set, Scoket (Item 85, Appendix B) Materials/Parts   Wire, Elect, 50 ft (Item 97, Appendix C) Personnel Required     (2) References     TM 9-4910-571-12&P