Materials/Parts
Wire, Elect, 50 ft (Item 97, Appendix C)
Personnel Required
(2)
References
TM 9-4910-571-12&P
TM 9-2320-366-34-1
2-390 Change 1
c30. WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN
CODE 41, 42, 44, AND/OR 45 SUB CODE 22 (PRIOR TO SERIAL NUMBER 6510032369
WITH TRANSMISSION ADAPTER CABLE ASSEMBLY)
INITIAL SETUP
Equipment Condition
Engine shut down (TM 9-2320-366-10-1).
Batteries disconnected (TM 9-2320-366-20-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
STE/ICE-R (Item 70, Appendix B)
Multimeter, Digital (Item 41, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Wrench, Torque, 0-200 lb-in. (Item 93, Appendix B)
WARNING
CAUTION
Read WARNING and
CAUTION on
following page.
KNOWN INFO
TEST OPTIONS
Continuity Test or
STE/ICE-R Test #91
REASON FOR QUESTION
1.
NO
Replace transmission external
wiring harness (para 6-7).
YES
START
POSSIBLE PROBLEMS
Circuit breaker OK.
Batteries OK.
WTEC II cab transmission
harness OK.
Faulty transmission external
wiring harness.
Faulty transmission adapter
cable assembly.
Faulty transmission internal
wiring harness.
Faulty G solenoid.
Faulty WTEC II TEPSS.
Is continuity present from
connector P119-D to
external wiring harness
31-pin connector pin C?
If continuity is not present,
transmission external wiring
harness is faulty.
