c9. WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN
CODE 32 AND ANY SUB CODE (PRIOR TO SERIAL NUMBER 6510032369 WITH
TRANSMISSION ADAPTER CABLE ASSEMBLY)
TM 9-2320-366-34-1
2-158 Change 1
WARNING
CAUTION
Read WARNING and
CAUTION on
following page.
START
KNOWN INFO
Continuity Test or
STE/ICE-R Test #91
TEST OPTIONS
REASON FOR QUESTION
YES
Replace transmission external
wiring harness (para 6-7).
1.
NO
POSSIBLE PROBLEMS
Is continuity present from
connector P119-h to
external wiring harness
31-pin connector pin W?
If continuity is not present,
transmission external wiring
harness is faulty.
Circuit breaker OK.
Batteries OK.
WTEC II cab transmission
harness OK.
WTEC II TEPSS OK.
Faulty transmission external
wiring harness.
Faulty transmission adapter
cable assembly.
Faulty transmission internal
wiring harness.
Faulty C3 pressure switch.
INITIAL SETUP
Equipment Condition
Engine shut down (TM 9-2320-366-10-1).
Batteries disconnected (TM 9-2320-366-20-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
STE/ICE-R (Item 70, Appendix B)
Multimeter, Digital (Item 41, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Wrench, Torque, 0-200 lb-in. (Item 93, Appendix B)
Wrench Set, Socket (Item 85, Appendix B)
Materials/Parts
Wire, Elect, 50 ft (Item 97, Appendix C)
Personnel Required
(2)
References
TM 9-4910-571-12&P
