TM 9-2320-366-34-1
D-8. DUMP BODY LIFTING BRACKET (CONT)
Item
Part Number
Material Description
Size
Qty
3
N/A
Plate steel, ASTM A36
10.5 in. (26.7 cm) X 4.0 in. (10.2 cm) X 0.375
in. (0.95 cm)
1
5
N/A
Plate steel, ASTM A36
5.25 in. (13.3 cm) X 4.0 in. (10.2 cm) X 0.375
in. (0.95 cm)
1
Figure D-18. Front and Mounting Plate
a. All dimensions are in inches (centimeters).
b. Fabricate (3) and (5) from ASTM A-36 steel plate.
c. Drill 1-1/2 inch (3.84 cm) diameter hole in plate (5) as shown in Figure D-18. Front and Mounting Plate.
d. Grind bevel on edge of each plate for weld surface as shown in Figure D-18. Front and Mounting Plate.
e. De-burr and remove sharp edges.
D-24
