• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Section IV.   MAINTENANCE PROCEDURES
GENERAL CLEANING INSTRUCTIONS

TM-9-2320-366-34-1 M1078 Series 2 1/2-Ton 4x4 Light Medium Tactical Vehicles (LMTV) Manual
Page Navigation
  1182    1183    1184    1185    1186  1187  1188    1189    1190    1191    1192  
TM 9-2320-366-34-1 2-23.   GENERAL REMOVAL INSTRUCTIONS (CONT) g.   Data Plate Removal. WARNING Wear appropriate eye protection when drilling out rivets.  Failure to comply may result in injury to personnel. CAUTION Use  appropriate  size  drill  bit  when  drilling  out  rivets.    Failure  to  comply  may  cause damage to equipment. Remove rivets and data plate from vehicle. h.   Rivnut Removal. WARNING Wear appropriate eye protection when drilling out rivets.  Failure to comply may result in injury to personnel. CAUTION Use  appropriate  size  drill  bit  when  drilling  out  rivets.    Failure  to  comply  may  cause damage to equipment. Remove rivets and rivnut from vehicle. 2-24.   GENERAL DISASSEMBLY INSTRUCTIONS a.   Cleanliness.   Work area must be as clean as possible to prevent contamination to components. CAUTION Self-locking  fasteners  that  are  loosened  must  be  replace,  not  tightened.    Failure  to comply may cause damage to equipment. b.   Locking Parts.  Replace all lockwashers, cotter pins and locknuts at time of reassembly. c.  Expendable Parts. All gaskets, packings, and seals removed during repair must be discarded and replaced with new parts. d.  Removing Seals. Be sure all traces of oil, gaskets and sealants are removed from components. When possible, use wood or plastic probes and scrapers to prevent damage to machined surfaces. 2-1112







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.