TM 9-2320-366-34-1
NOTE
Both left and right rear axle
bogies are inspected in the
same manner.
(1) Remove six screws and cover from rear axle
bogie.
(2) Inspect rear axle bogie for damage.
(3) Jack up one of the rear axles, place on motor
vehicle maintenance trestle, and look for
excessive movement in axle bogie.
(4) Remove motor vehicle maintenance trestle and
lower axle.
WARNING
Adhesives, solvents, and
sealing compounds can burn
easily, can give off harmful
vapors, and are harmful to
skin and clothing. To avoid
injury or death, keep away
from open fire and use in a
well ventilated area. If
adhesive, solvent or sealing
compound gets on skin or
clothing, wash immediately
with soap and water. Failure
to comply may result in serious
injury or death to personnel.
(5) Apply thin bead of sealing compound to seating
surface of housing.
(6) Install cover and six screws on housing with fill
plug at the 1 o'clock position.
(7) Tighten six screws to 24 lb-ft (32 N·m).
2-985/(2-986 Blank)
