TM 9-2320-366-34-1
WARNING
Wear approved eye protection when
performing pressure checks. Failure
to comply may result in oil getting
into eyes. If oil contacts eyes, seek
medical attention immediately.
Fuel and oil are slippery and can
cause falls. Wipe up spilled fuel
or oil with rags. Failure to comply
may result in injury to personnel.
Drop hydraulic pressure to zero
before disconnecting any
hydraulic hose, tube, or fitting.
Failure to comply may result in
injury to personnel.
(1) Start engine (TM 9-2320-366-10-1). Allow engine
to run until reaching normal operating
temperature.
(2) Engage PTO (TM 9-2320-366-10-1).
(3) Increase engine RPM until 1250-1450 RPM is reached
(TM 9-2320-366-10-1).
(4) Check three stage hydraulic pump for overheating with engine
at normal operating temperature.
(5) Decrease engine rpm to 750 rpm.
(6) Disengage PTO (TM 9-2320-366-10-1).
(7) Shut down engine (TM 9-2320-366-10-1).
2-971